Most of fluoride waterproofing agents are cationic or weak cationic.
Here, I want to introduce a special item PENELON 8851-A, this is a non-ionic waterproof agent product in Shanghai dongmei chemical company.
Waterproof agent’s stability is very important to the working process.
When during the dyeing process, factory will use 2 or more textile auxiliaries to get the good effect, however, most of textile agents and some dyestuff are anionic products.
If the fabric needs to process the waterproof treatment after dyeing, please aware there will have no cleaned orunwashed textile agents and dyestuff on the fabric, which will affect the waterproof treatment effect.
It might cause series of problem as below:
1. Floating oil
2. Agglomerate
3. Sticky roller
However, by using PENELON 8851-A can improve the stability of waterproof agent, which could avoid the above problems, in the meanwhile, this product can be used with coating agent together.
Most of coating finishing agentsis anionic product and they cannot be mixed with general waterproof agent because the different iconicity.
We’ve been working for many tests and finally proved that PENELON 8851-A has good compatibility with general PU coating agent.
The mixed coating paste can be placed for more than 72 hours and withoutstratification or agglomeration problems so it can guarantee for one-step method of coating-waterproof finishing.
PENELON 8851-A has good water repellent, oil repellent and washableproperties and we really recommend this as finishing agent.
|
